How to eliminate epoxy crystal adhesive bubbles?
Release time：2024-08-27 13:40:14
page views：
Epoxy crystal adhesive in the storage, transportation, mixing, the use of the process will produce a large number of bubbles, bringing us a lot of inconvenience:
1. A large number of solvents in the material volatilization and bring out a large number of air bubbles.
2. large viscosity, the air bubbles do not release capacity.
3. low temperature, so that the viscosity of the crystal adhesive greatly increased, bubble release difficulties.
4. the curing process is too fast to release the air bubbles.
5. the casting body is complex and the curing is too thick. The air bubbles cannot escape from the mold cavity and the material, and so on.
How can we effectively solve these bubble problems? We will tell you how to solve this problem!
Use our crystal adhesive defoamer, add a small amount can achieve the effect of defoaming;
Especially suitable for high viscosity epoxy system defoaming;
Eliminate air bubbles generated in the process of production, mixing, stirring and so on;
Resistant to yellowing, highly transparent, without affecting transparency and performance.
If you also have trouble with adhesive bubbles, you are welcome to inquire at any time!
